EFS4WD
Reference: EB2X16PX35
Shocks
EFS Polyurethane Shock Absorber Bush, Type EB2, 16 mm Bore, 35 mm Long
EFS polyurethane shock absorber bush, designated EB2 FI16 L35 — 16 mm bore, 35 mm long. Fitted into the shock eye it damps vibration and noise, and polyurethane instead of rubber means less play and a longer-lived mount. This is the shorter of the 16 mm EB2 bushes.
EFS Polyurethane Shock Absorber Bush, Type EB2, 16 mm Bore, 35 mm Long
A new damper on an old, hammered-out bush is money thrown away — the play in the eye takes back exactly the precision you just paid for. A bush costs a fraction of the damper and goes in while the suspension is already apart.
This is a polyurethane bush from the EFS 4x4 hardware catalogue, from the EB2 range with a 16 mm bore, in the 35 mm length.
Material Polyurethane | Bore 16 mm | Length 35 mm |
Key benefits
- Polyurethane instead of rubber — less play in the shock eye and more predictable suspension behaviour.
- A 16 mm bore and 35 mm length is a defined size, not a universal bush you have to trim.
- A part from the suspension maker's own catalogue rather than a random substitute.
Technical data
- Material: polyurethane
- Type: EB2
- Bore diameter: 16 mm
- Length: 35 mm
- Manufacturer: EFS 4x4
- Part number: EB2X16PX35
Who it is for
For four-wheel drive and pick-up owners refreshing the shock mounts on an EFS suspension, and for workshops gathering the small parts for a rebuild. If you measured your old bushes and got a 16 mm bore at 35 mm long, this is the one.
Fitting notes
The bush works inside the shock eye. Measure the bore and the housing length before ordering — the 16 mm EB2 range also includes a longer version, so the two are easy to mix up. Not sure? Send us your damper part number.
Why it is worth it
- A defined size instead of a compromise.
- Polyurethane copes with oil, water and salt better than rubber.
- A cheap part that protects a much more expensive damper.
Going through the suspension? Order the bushes with the rest of the hardware so you are not back on the same job next month.
Frequently Asked Questions
What bore and length is it?
16 mm bore and 35 mm length, matching the EB2 FI16 L35 designation on the manufacturer's product page.
What is it made of?
Polyurethane — the product page describes it explicitly as a polyurethane bush.
How does it differ from EB2X16PX38?
Length only. Both are EB2 type with a 16 mm bore, but EB2X16PX35 is 35 mm long and EB2X16PX38 is 38 mm.
How do I pick the right size?
Measure the old bush: bore diameter and length. You can also send us your EFS damper part number and we will check the fit.
