Nomadtech
Reference: NOMSAM31ECO
Lift Kits
Suspension Lift Kit +3'' Suzuki Samurai Stage 1 Sekureco
Three inches of lift for the Suzuki Samurai in the Stage 1 build with Sekureco dampers. The kit holds four +3'' Raptor 4x4 leaf springs and four dampers matched to that height. U-bolts and bushings are ordered separately, so you pay only for what you actually need.
Suspension Lift Kit +3'' Suzuki Samurai Stage 1 Sekureco
On a car as short as the Samurai, three inches changes more than the ride height — it changes which lines are worth attempting at all. This kit delivers that step without padding the invoice with parts you may not need yet.
The Stage 1 Sekureco build concentrates on two things: springs and dampers. U-bolts and bushings stay outside the kit and are listed separately by the distributor, so you add them only when yours are genuinely due.
Lift height +3'' | Leaf springs Raptor 4x4, set of 4 | Dampers Sekureco, set of 4 |
Key benefits
- Three inches of lift — the manufacturer names extra clearance and better off-road ability as the main result.
- Room for larger tyres — bigger wheel fitment is stated directly in the kit specification.
- Both axles covered — two springs and two dampers per end, so the car sits level once it is back on the ground.
- You pay for what you replace — U-bolts and bushings are not bundled into the price; add them separately if yours are worn.
- Trail and road balance — the manufacturer's own framing, which matters for a Samurai that still sees tarmac.
What is in the kit
- 2 front +3'' Raptor 4x4 leaf springs
- 2 rear +3'' Raptor 4x4 leaf springs
- 2 front Sekureco +3'' dampers
- 2 rear Sekureco +3'' dampers
U-bolts and bushings are not part of the set — the product page points to separate listings for those.
Technical data
- Vehicle: Suzuki Samurai
- Lift height: +3''
- Trim level: Stage 1 Sekureco
- Leaf springs: Raptor 4x4, +3'', 4 pcs
- Dampers: Sekureco, +3'', 4 pcs
- Part number: NOMSAM31ECO
It goes to owners who want a clear lift and bigger rubber but have already done part of the suspension, or who plan to change bushings and U-bolts as a separate job. It is also the sensible pick when the budget should go into height and travel rather than into a box of small parts.
Fitting notes
Inspect the U-bolts before you start — stretched ones are the worst thing to torque onto fresh leaf packs. At three inches, check brake line lengths and steering behaviour as well. The Szekla4x4 workshop installs lifts like this regularly and can handle the whole job.
Why this kit
- Three inches of lift in a build that does not charge you for parts your car does not need.
- Raptor 4x4 leaf springs — the same spring brand used across this range from entry to top trim.
- An open configuration: bushings and U-bolts added when the time comes.
Not sure whether your U-bolts can be reused? Send us a photo and we will judge it and spec a set.
Frequently Asked Questions
What exactly is included?
Two front and two rear +3'' Raptor 4x4 leaf springs, plus two front and two rear Sekureco +3'' dampers.
Do I get bushings and U-bolts?
No, they are not part of the kit. The product page states that U-bolts and bushings can be bought from separate listings.
Which dampers are supplied?
Sekureco dampers in the +3'' lift specification. This build is based on those units rather than on the Raptor 4x4 Silver Series used in other trims.
How much will the car rise?
By three inches, around 7.5 cm — the lift height quoted for both the springs and the dampers in this kit.
