Raptor 4x4
Reference: RAP-15143
Coil springs
Front Lift Springs +2" Toyota Land Cruiser LJ70 Round Lamp, Yellow
A pair of Raptor 4x4 front coil springs that lift a round lamp Toyota Land Cruiser KZJ/LJ 70 by roughly 6 cm. Yellow finish, 8 kg per pair. More clearance and room for a taller tyre on the front axle — round lamp body only.
Front Lift Springs +2" Toyota Land Cruiser LJ70 Round Lamp, Yellow — Raptor 4x4, part 15143
The front end of a round lamp 70-series quietly loses height over the years, and with it the droop travel that decides whether a wheel still works in a rut or simply hangs in the air. This pair of Raptor 4x4 front springs restores that travel and adds around 6 cm of ride height on top.
The part number belongs to the round lamp (faro tondo) body in KZJ 70 and LJ 70 form — the square lamp cars take a different spring, so it is worth checking which one you are looking at before ordering.
Fitment Land Cruiser KZJ 70 / LJ 70, round lamp | Lift +6 cm (approx. +2") | Supplied as Pair of front springs |
Key benefits
- +6 cm at the front axle — a better approach angle and space for a taller tyre without cutting the arches.
- A full axle set — both springs come from one matched pair, so the car does not sit lopsided.
- Yellow finish — a consistent look under the car and easy to spot during a suspension inspection.
- Listed specifically for the round lamp body — the manufacturer splits its catalogue between the two body versions, so you get the rate calculated for this car.
What you get
- 2 x Raptor 4x4 front coil spring (one full axle set)
Technical data
- Manufacturer part number: 15143
- Manufacturer: Raptor 4x4 (Saglietti S.r.l., Italy)
- Axle: front
- Lift height: +6 cm
- Colour: yellow
- Body version: round lamp (faro tondo), KZJ 70 / LJ 70
- Weight of the pair: 8 kg
Who it is for. Owners of a round lamp 70-series who are moving to bigger tyres, or who simply want back the height that tired original springs have given away. It works equally well on a trail car and on an expedition build where the front end permanently carries a bull bar or a winch.
Fitting notes
A 6 cm lift changes front axle geometry, so longer shock absorbers are fitted alongside the springs, and brake line slack and linkage travel are worth checking at full droop. Szekla4x4 runs an off-road and overlanding workshop and can specify and fit the whole package for you.
Why buy this set
- A catalogued +6 cm instead of improvising with spacers.
- Made by an Italian off-road suspension manufacturer with a deep 70-series range.
- Explicitly listed for the round lamp body, so fitment is not guesswork.
Planning a full 70-series lift? Talk to us and we will match these springs with shocks of the correct stroke.
Frequently Asked Questions
How many springs are in the set?
Two — a complete front axle set. The manufacturer lists this part number as a pair.
Will they fit a square lamp 70-series?
No. The manufacturer lists this part number for the round lamp (faro tondo) body. There is a separate Raptor 4x4 front spring for the square lamp cars.
How much lift do they give?
Around 6 cm, roughly 2 inches over standard ride height.
How much does the pair weigh?
8 kg, as stated by the manufacturer.
Do I need different shock absorbers?
Yes — at 6 cm of lift the original shocks run out of travel, so longer units are used. Raptor 4x4 lists shock absorbers designed around this lift height.
