Raptor 4x4
Reference: RAP-261412
Coil springs
Raptor 4x4 4-Spring Lift Kit +40 mm Jeep Renegade
Four springs in one kit, front and rear, lifting the Jeep Renegade by 40 mm at both axles. Increased wire diameter and a medium-load rate leave reserve for extra equipment instead of only raising the car.
Raptor 4x4 4-Spring Lift Kit +40 mm — Jeep Renegade
Lifting a car piece by piece usually ends with the front and rear working differently and a stance that looks off. This kit settles it in one order: four springs, one lift height, the same rate at both ends.
Raptor 4x4 gives you +40 mm front and rear on springs with increased wire diameter, rated for medium load. The Renegade gains clearance and you gain reserve for a bumper, a roof rack or a boot full of gear.
Contents 4 springs: front + rear | Lift +40 mm at both axles | Application Jeep Renegade from 2014 |
Key benefits
- Even +40 mm at both axles — the car rises proportionally, with no nose-down or tail-high look.
- One order instead of two — everything the spring lift needs, in a single box.
- Medium-load rate — reserve for additional mass at the front and at the rear.
- Increased wire diameter — less chance of losing the lift once heavier hardware goes on.
- Stated comfort improvement on and off road, credited to the spring rate itself.
- Black paint on all four springs.
What is in the box
- 2 front springs (equivalent to RAP-26141)
- 2 rear springs (equivalent to RAP-26142)
Technical data
- Manufacturer part number: 261412
- Manufacturer: Raptor 4x4 (Saglietti S.r.l., Italy)
- Vehicle: Jeep Renegade, model years from 2014
- Lift: +40 mm, front and rear
- Rate: medium load
- Finish: black paint
- Kit weight: 14 kg
Who it is for. Renegade owners who want to do the lift once and properly: trail use, longer trips with a loaded car, preparation for larger tyres. It is also a natural base for later stages, since Raptor 4x4 offers shocks matched to this height.
Fitting notes
Four springs means unloading the suspension at both axles, so spring compressors and a lift are required. A wheel alignment and headlight adjustment afterwards are mandatory. For a complete suspension package add the RAP-261514 shock set, which the distributor recommends with these springs.
Why it is worth it
- A complete kit rather than a lift assembled from separate items.
- The same rate at both ends, so the car behaves predictably.
- Part of the Raptor 4x4 system with matched shock absorbers.
Want springs and shocks in one go for your Renegade? Get in touch and we will put the package together.
Frequently Asked Questions
What exactly is in the kit?
Four springs: the front set and the rear set for the Jeep Renegade, both axles with the same +40 mm lift.
Is the lift the same at both ends?
Yes. The manufacturer quotes +4 cm front and rear, so the car keeps its factory stance.
Do I need new shock absorbers?
Raptor 4x4 offers the matching RAP-261514 four-shock set, 2 cm longer than standard, which can be used with lift kits up to +4 cm.
Does the kit fit every Renegade version?
The manufacturer lists these springs as suitable for all Renegade versions from 2014 onwards.
