Raptor 4x4
Reference: RAP-RP0910012025
Leaf Springs
Leaf Spring Mounting Bolt 12x92 Suzuki Samurai
A 12x92 mm leaf spring mounting bolt for the Suzuki Samurai, a Raptor 4x4 service part. On a suspension rebuild this is one item you almost never get to reuse: the old bolt is seized in the bush, bent or worn where it bears. Price per piece.
Leaf Spring Mounting Bolt 12x92 Suzuki Samurai
It starts innocently enough: you strip down the rear leaf to change the bushes and find the bolt seized solid inside the sleeve. It only comes out with heat and a drift, and what you are left holding is scrap. Without a spare bolt on the bench, the rebuild stops there.
That is what this listing covers — a Raptor 4x4 service bolt for the leaf spring mounting on the Suzuki Samurai, in the 12x92 mm size. Sold individually, so you order exactly as many as you are replacing.
Size 12 x 92 mm | Use Leaf spring mounting | Quantity Single piece |
Key benefits
- A defined catalogue size of 12 x 92 mm — no rummaging in the bolt box and no risk of too little bearing length inside the sleeve.
- A service part from a Suzuki suspension manufacturer rather than a random fastener from the hardware shop.
- Sold per piece, so you buy what you actually replace instead of paying for a set you do not need.
- A small item that can stall an entire rebuild if it is missing from the parts pile.
Technical data
- Manufacturer code: RP0910012025
- Application: leaf spring mounting (attacco balestra)
- Size: 12 x 92 mm
- Weight: 0.087 kg
- Type: Raptor 4x4 service part
- Vehicle: Suzuki Samurai
Add it whenever you are replacing leaf springs, spring bushes or shackles — in other words, on any serious Samurai suspension rebuild. It is also worth carrying as a spare on an expedition vehicle, where the suspension works harder than in daily use.
Fitting notes
- The price covers one piece — count the mounting points you are stripping and order accordingly.
- The 12 x 92 mm size applies to a specific mounting point. Samurai suspension also uses bolts of other lengths, so compare against your old part before ordering.
Why it is worth it
- A catalogue size instead of improvisation on a critical suspension joint.
- Low cost, high influence on whether the rebuild goes smoothly.
- Per-piece availability makes it easy to order exactly what you need.
If you are gathering parts for a Samurai leaf spring rebuild, put the bolts in the basket alongside the bushes — otherwise you will be back for them within two days.
Frequently Asked Questions
Is the price for a single piece?
Yes, this is a single-piece item. Order as many as you have mounting points to replace.
What exactly is the size?
The manufacturer states 12 x 92 mm — 12 mm diameter and 92 mm length.
What is this bolt for?
It is a leaf spring mounting bolt for the Suzuki Samurai suspension; the manufacturer lists it under Samurai leaf springs and springs.
Does it fit every leaf spring mounting point?
Not necessarily. The suspension uses bolts of several lengths, so compare the 12 x 92 mm size against the part you removed before ordering.
