Fender Flares and Extensions
Factory Flare Extensions 65 mm — Jeep Wrangler JL / Gladiator JT
A set of four strips extending the factory fender flares by 65 mm per side, in black. The supplier lists them for the Jeep Wrangler JL 2018-2026 in Sport, Sahara and European Rubicon trim, and for the Gladiator JT 2020-2026. Fitted with adhesive tape and then secured with screws.
Factory Flare Extensions 65 mm — Jeep Wrangler JL / Gladiator JT
The European JL has narrow factory flares that stop covering the tread once a larger tyre goes on. Rather than replacing the whole flare you can extend it — the body line comes back over the wheel and the flanks stop collecting stones.
This version adds 65 mm per side and is intended for factory flares. Fitting is in two stages: adhesive tape, then screws.
Intended for Jeep Wrangler JL 2018-2026 (Sport, Sahara, European Rubicon), Gladiator JT 2020-2026 (Sport and European models) | Width 65 mm per side | Fitting tape + screws |
Key features
- Extends the factory flare by 65 mm per side without replacing it
- An extra lip limits sand working in between strip and flare
- Two-stage fitting: adhesive tape plus stainless screws
- The kit includes cleaner, primer, an applicator, a blade and fitting instructions
- Four strips per set — front and rear differ in length
Technical data
- Supplier catalogue number: TXJL 110065
- Width: 65 mm per side
- Colour: black
- Contents: 4 strips, a set of stainless screws (15 per strip), cleaner, primer, applicator, blade, instructions
- Fixing: adhesive tape + 12-15 screws per flare
Fitting and notes
Match each strip to its flare — front and rear differ in length. Degrease with the supplied cleaner, apply primer, hold the strip against the flare edge and drive the screws slowly while pulling it lightly taut. Work at around 20 degrees C.
The supplier gives no material and no dimensions beyond the width. Note a contradiction in the data: the product name and the body text say 65 mm, while the short description and the supplier's image filename say 70 mm. Confirm the width with the seller before buying.
Frequently asked questions
Do they fit the US Rubicon?
The supplier lists Sport, Sahara and the European Rubicon. The US version is not listed — ask the seller.
Does fitting require drilling?
Yes. Once taped, the strip is also secured with screws, 12-15 per flare.
