LED HID lighting and more
LED Light Kit 2 x 48 W with Beam Pattern Covers
A pair of 48 W LED lights with Osram diodes and a full set of eight covers that change the beam pattern: yellow spot, white spot/flood, yellow spot/flood and black blanking covers. The kit includes wiring with a switch and relay plus stainless steel mounts. The supplier states no E/ECE type approval.
LED Light Kit 2 x 48 W with Beam Covers
One lamp rarely covers everything. A narrow spot throws far but leaves the verges dark; a wide flood shows the surroundings but loses reach; in fog or snow, yellow tires the eyes less than cold white. This kit solves it with covers — one pair of lamps, four beam patterns.
Inside are Osram diodes: two at 9 W and two at 15 W per lamp, 48 W total. The housing is aluminium with a temperature controller protecting the circuit from overheating.
Power 2 x 48 W | Output 2600 lm +10%, 6000K | Supply 9-36 V, IP67 |
Key features
- Four beam patterns from interchangeable covers
- Osram KW CSLPM1 diodes — 2 x 9 W and 2 x 15 W per lamp
- Aluminium housing and a built-in temperature controller
- Stainless steel mounts, fixed on twin bolts
- Wiring with a switch and relay included
- In the photos: square lamps with four reflectors and snap-on spot, combo, spot yellow and combo yellow covers
Technical data
- Supplier catalogue number: TXJL 18775
- Power: 2 x 48 W (Osram KW CSLPM1, 2 x 9 W and 2 x 15 W per lamp)
- Luminous flux: 2600 lm +10%
- Colour temperature: 6000 K
- Ingress protection: IP67
- Supply voltage: 9-36 V
- Contents: 2 lamps, 8 covers (2 yellow spot, 2 white spot/flood, 2 yellow spot/flood, 2 black), wiring with switch and relay, stainless mounts
Type approval
The supplier states no E or ECE approval. It describes them as driving lamps, which fall under the rules on auxiliary lighting. Before registration or a roadworthiness test, establish with the seller whether they carry E/ECE approval and whether you get the paperwork.
Fitting and notes
The supplier gives no lamp dimensions and no bracket hole spacing — check they fit the intended position before buying. Nor does it say whether 2600 lm applies to one lamp or the whole kit. The description makes no reference to any specific vehicle — treat the kit as universal.
Frequently asked questions
Do the lamps have type approval?
The supplier states no E/ECE approval. Settle this with the seller before a roadworthiness test.
Is 2600 lm the figure per lamp?
The supplier does not specify. Ask the seller.
