Roof Racks and Accessories
Roof Rack TopFire for Jeep Wrangler JL
An aluminium TopFire roof platform for the Wrangler JL from 2018: a manufacturer-rated 300 kg load capacity, black powder coat and 25 kg of its own mass instead of the weight typical of a steel rack. The front edge is factory-prepared for a TXLO S5-50 250 W LED panel, so the roof doubles as a mount for your expedition lighting.
Roof Rack TopFire for Jeep Wrangler JL
On a long trip you run out of space long before you run out of enthusiasm. A roof tent, traction boards, jerry cans and spares all have to go somewhere, and the Wrangler's boot fills up faster than you expect. A roof platform moves the bulkiest items above the cabin and frees up room where you actually need it.
This one is all aluminium and powder coated — hence 25 kg of its own mass and a manufacturer-stated 300 kg load rating. The flat slatted floor gives you plenty of tie-down points along its whole length, and the shaped front deflector shields the load head-on.
Material Aluminium, powder coated | Load capacity 300 kg | Weight 25 kg per distributor data sheet |
Key benefits
- Powder-coated aluminium — 25 kg of its own mass instead of the weight typical of a steel structure of the same size. With a load carried at the highest point of the vehicle, every kilogram saved means less of a shift in the centre of gravity.
- 300 kg rated capacity — with headroom for a roof tent with mattress and hardware, which usually stays within a few dozen kilograms.
- Lighting position already there — the platform is prepared for a TXLO S5-50 250 W LED panel. The installation photos show a light bar fitted to the front edge, so there is no bracket to fabricate.
- Slatted floor — cross slats spread along the whole length give a continuous set of tie-down points, whatever the size of the load.
- Front deflector — the shaped panel at the front of the platform shields the gear you carry from the front.
- Black finish — black powder coat that matches the Wrangler's dark hardtop.
What's in the box
- TopFire roof rack, bolted together from separate parts: two side rails with cut-out TopFire lettering, a shaped front deflector, a rear panel and the cross slats of the floor — the full set is shown in the manufacturer's exploded drawing.
- Mounting brackets that fix the platform to the hardtop, visible in the installation photos.
 |  |
Technical data
- Part number: TXTF 0070
- EAN: 5905274800446
- Type: platform roof rack
- Material: aluminium, powder coated
- Colour: black
- Load capacity per manufacturer: 300 kg
- Weight per distributor data sheet: 25 kg
- Fitment: Jeep Wrangler JL from 2018
- Prepared for a TXLO S5-50 250 W LED panel
Who it's for
For drivers who pack the Wrangler for more than a weekend: a roof tent, traction boards, jerry cans, boxes and camping kit outgrow the boot quickly, especially in the two-door body or when two of you travel with a dog. The platform also makes sense for anyone who was going to fit a front-of-roof LED bar anyway — the position for it is already there.
Fitting and notes
In the installation photos the rack is bolted to the Wrangler's hardtop on brackets resting on its edges. The structure bolts together from separate parts, so it is assembled before it goes on the car.
One point worth stressing: 300 kg is the capacity quoted for the rack structure itself. What you can actually carry while driving is limited by the roof load your vehicle manufacturer allows — and the lower of the two figures is the binding one. A heavy roof load also changes how the car behaves in body roll, so adapt your driving accordingly.
Szekla4x4.pl runs its own workshop specialising in off-road and overlanding — if you want the platform and the lighting fitted and wired properly, we can do it here.
Why it's worth it
- Powder-coated aluminium instead of steel — 25 kg of structure carried at the highest point of the vehicle.
- A stated 300 kg capacity, with headroom for a roof tent and expedition gear.
- A ready position for a 250 W LED panel, with no brackets to fabricate.
If you are planning a longer trip in the Wrangler, the roof is the last unused space on this car — it is time to put it to work.
Frequently asked questions
What is this rack made of?
Powder-coated aluminium. The manufacturer lists 25 kg — clearly less than a steel structure of comparable size.
How much will it carry?
The manufacturer states a 300 kg capacity for the rack structure itself. Remember that while driving, the roof load allowed by your vehicle manufacturer is binding if it is lower.
Can I mount a light on it?
Yes. The platform is prepared for a TXLO S5-50 250 W LED panel, and the installation photos show an LED bar fitted to the front edge of the rack.
What does it bolt to?
In the installation photos the rack is bolted to the Wrangler's hardtop, on brackets resting on the roof edges.
Which model years does it fit?
The manufacturer states Jeep Wrangler JL from 2018.
