Raptor 4x4
Reference: RAP-06141
Leaf Springs
Front Leaf Springs +3" Raptor 4x4 Suzuki Samurai (Pair)
A pair of Raptor 4x4 +3" front leaf springs for the Suzuki Samurai. They raise the front axle three inches for better clearance and approach angle while replacing a tired factory pack with new steel. The price covers the pair, so the whole axle is done at once.
Front Leaf Springs +3" Raptor 4x4 Suzuki Samurai
Front leaf springs on a Samurai take the hardest life — they absorb the hits when the car climbs onto an obstacle, and they are the first to sag with age. When the nose starts sitting lower than the tail and the suspension keeps bottoming out, a new spring pack fixes two things at once: it restores the rate and lifts the car three inches.
This is a pair of Raptor 4x4 front leaf springs in the +3" specification. The price covers the pair, so both sides of the front axle are handled in one order.
Lift +3" | Axle Front | Contents 2 springs (price per pair) |
Key benefits
- Three inches of lift on the front axle: more clearance under the differential and a better approach angle.
- A fresh spring pack restores the rate, which no amount of add-a-leaf shims will bring back to a tired spring.
- Sold in pairs, so both sides work identically — essential for a car that sits level.
- The natural partner to the +3" rear pair (RAP-06142) when lifting the whole vehicle evenly.
Technical data
| Vehicle | Suzuki Samurai |
| Axle | Front |
| Lift height | +3" |
| Quantity | 2 (complete axle set) |
| Weight | 18 kg (Raptor 4x4 manufacturer data) |
| Part number | RAP-06141 / manufacturer code 06141 |
Who it is for. Cars with tired front springs, and builds where the lift goes in stages — front first, rear later, or the other way round. It is also the service part for the same brand's +3" lift kits.
Fitting notes
Replacing a leaf spring means undoing the U-bolts, the shackle and the main pin — a good moment to check the bushings and brake hoses as well. After raising the front by three inches, check the alignment and the front driveshaft angle. Our off-road workshop at Szekla4x4.pl does this work routinely if you want it set up properly first time.
Why buy it
- A full axle set in one line item, with no risk of mismatched sides or heights.
- Raptor 4x4 +3" springs are the same parts used in this brand's proven lift kits.
- Lets you spread a suspension build over time instead of buying a complete kit at once.
If you are lifting the Samurai in stages or replacing a tired front end, this is the right pair — ask us if you want matching dampers.
Frequently Asked Questions
Is the price for one spring or a pair?
For the pair. The source states explicitly that the price refers to a set of two front springs.
How much lift do they give?
Three inches on the front axle.
Are these front springs only?
Yes, this is the front set. The rear equivalent is the +3" rear leaf spring pair (RAP-06142).
Are shock absorbers included?
No, this is the spring pair only. Dampers for a +3" lift are chosen separately.
